SOHC.co.uk Forums > CB500/550
Indicator fault
davidrsmith:
Hi
Now got the carbs fitted (thanks for the help) I have fitted the airbox and the battery. I have tried turning the electrics on for the first time, all seems ok except the indicators. Moving the switch to either left or right just gives me a loud screeching noise, the bulbs don't light and I can't hear the relay at all.
Anyone ever seen this, I haven't had a chance to fault find on it yet but I guess either the relay is shot or there is a short?
Dave
Bryanj:
The screech could be the relay if there is a short or could be the audible device depending on what bike
davidrsmith:
Hi
The bike is a CB550k3 which was imported from the US. So it was built to their standards, on the circuit diagram in the haynes manual it does show a turn signal buzzer, but I haven't actually seen it (not that i've looked) on the bike.
Dave
royhall:
May not be related, but it's good practice to run a separate earth cable to each of the indicators. Sounds like the flasher relay has gone, and take the opportunity to remove the awful buzzer.
mike the bike:
Agree 100% with the above advice.
Navigation
[0] Message Index
[#] Next page
Go to full version