« previous next »
Pages: [1]   Go Down

Author Topic: Wiring loom routes  (Read 1072 times)

Offline postman

  • Newbie
  • Posts: 6
    • View Profile
Wiring loom routes
« on: October 31, 2016, 02:45:42 PM »
Hello,
could somebody confirm the routing of the loom on my 400/4? Does the main loom pass above or below the bottom yolk? Also where is the handlebar switch connector positioned. When I bought the bike it was hanging down between the exhausts but that does not look right. Finally I have seen a picture of the loom running above the coils whereby mine runs below.
I would be most grateful if somebody could confirm and maybe post a couple of pictures?
Thanks in anticipation.
Pat.
Logged

Offline Chris400F

  • SOHC Master
  • Posts: 1013
    • View Profile
Re: Wiring loom routes
« Reply #1 on: October 31, 2016, 02:57:52 PM »
Check out page 110 of the CB350F/400F Shop Manual in Ashimoto's Dropbox (http://www.sohc.co.uk/index.php/topic,8884.0.html).
I think the diagrams there should show exactly what you want.
« Last Edit: October 31, 2016, 04:26:08 PM by Chris400F »
Logged

Offline postman

  • Newbie
  • Posts: 6
    • View Profile
Re: Wiring loom routes
« Reply #2 on: October 31, 2016, 05:18:00 PM »
That's brilliant. Thanks.
Logged

Offline AshimotoK0

  • Grogu
  • *
  • Posts: 7401
  • Mad Scientist.... more power Igor ! ٩(̾๏̮̮̃̾๏̃̾)۶
    • View Profile
Re: Wiring loom routes
« Reply #3 on: November 05, 2016, 07:05:43 PM »
Bit of info on P14 onwards in this in my Dropbox too

CB400F DEALER SETUP INSTRUCTIONS .. RARE !!

http://www.honda4fun.com/pdf_man_officina/CB400_set-up_man/CB400_set-up_man.pdf
Logged
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.” Grace Slick, Woodstock '69 .. In the year of the Sandcast.
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal