General > Announcements

Jis screwdrivers

(1/6) > >>

Colonial-Clive (yindi):
Hi guys and gals found this site today for JIS screwdrivers that fit the old cross heads, no more chewed screws.

http://ruggedroads.co.uk/epages/00cbb604-5d1c-407e-8207-580e14387ec5.sf/en_GB/?ObjectPath=/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/Products/%2212705/6/8%22

Seabeowner:
They is also an impact version that is out of stock atm. But available elsewhere. Has anyone used one of these?

http://ruggedroads.co.uk/epages/00cbb604-5d1c-407e-8207-580e14387ec5.sf/en_GB/?ObjectPath=/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/Products/125961

JamesH:
Yes to the above and they're absolutely superb tools.

Trigger:
I have spent thousands on tool over the years and have found these JIS tools a rip off. Most people are shocked that I still use PH1, 2 and 3 and find they do the same job, even on the end of a torque wrench.
Even Ash had to agree with me that the PH is a very good fit.
The only time I have trouble getting a JIS machine screw out is when someone else has had a go before me.
And bloody cheap >>> http://www.ebay.co.uk/itm/10-x-Screwdriver-Screw-Bits-25mm-S2-Grade-Steel-1-4-inch-Various-Types-/181247177367?var=&hash=item2a332c7297:m:mKYZ1QBnqZ27KWZ-3ulcVtQ

mike the bike:
I agree Trig, I would add that a PH2 fits better with the tip ground off a tadge.

Navigation

[0] Message Index

[#] Next page