Author Topic: Recommendations on Engineers for Re-bore/ Head skimming/ Valve seats/ Cleaning  (Read 667 times)

Offline Andrewd2667

  • Newbie
  • Posts: 5
    • View Profile
I would greatly appreciate if anyone can advise/recommend on engineering services in (Hertfordshire would be ideal) to do the following on the CB400

1. Re-bore and honing -
2. Head skimming
3. Valve seats / valves lapping
4. Cleaning - Vapour blasting

The picture is of the guilty piston - it must of had a hard life.



Offline Laverda Dave

  • SOHC Jedi
  • Posts: 2531
  • Health is wealth
    • View Profile
Even though I live in Middlesex I use J D Autoworx in Wallington, Surrey.  Highly recommended, they did a lot of work on my 400/4.
1976 Honda 400/4
1977 Rickman Honda CR750
1999 Honda VFR 800FX
1955 750 Dresda Triton
1978 Moto Morini 350 Sport
1978 Honda CB400/4 'Rat' bike
1982 Laverda 120 Jota

Offline Trigger

  • Grogu
  • *
  • Posts: 8434
  • Engines built on reputation, not advertising.
    • View Profile
I would greatly appreciate if anyone can advise/recommend on engineering services in (Hertfordshire would be ideal) to do the following on the CB400

1. Re-bore and honing -
2. Head skimming
3. Valve seats / valves lapping
4. Cleaning - Vapour blasting

The picture is of the guilty piston - it must of had a hard life.

Try T&L Engineering up the road from you in Bedford.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal