New member

[Tony P]

Very funny, I will get some pics on here tomorrow after work !

[SteveD CB500K0]

Hi Tony.  Just up the road!

Julie - this looks OK to me (as a mere 500 owner...) https://en.wikipedia.org/wiki/Honda_CB400F

[Nurse Julie]

Haha, your right Steve, they must have changed the picture, it used to show a CB400/4 with non spoked wheels

[Chris400F]

Wheels required then !

May be able to help with a front one, or just a hub if you want to rebuild with a new rim - it depends what you need.
From your earlier post does that mean that you have cast wheels?

[Tony P]

Hi Chris

So here she is

[Tony P]

As you can see, going to need a few bits and bobs, including a kickstart shaft !

[SteveD CB500K0]

They look like they're from an XS Yamaha. I had a 500 once with XS400 alloys.


Sent from my iPhone using Tapatalk

[Chris400F]

Pretty sure they are aftermarket, I have seen similar ones fitted before to 400's but don't know the make (maybe ERA?).
There is probably a maker's name on a spoke or rim somewhere.
Think Yamaha ones are seven spoke, not six.
There is probably a market for these if you want to get rid of them, or keep them as a period accessory - depends on how original you plan to go.
Also clocks look like Superdream.

[Tony P]

I will be getting rid as I want spoked wheels as per the original.

Will start stripping her down Friday !

[SteveD CB500K0]

Think Yamaha ones are seven spoke, not six.

You are absolutely right Chris (as usual...)

[ Guests cannot view attachments ]

[Tony P]

Is that yours Steve ?

[mike the bike]

It may be a good idea to post a list of parts you're after;  some of us may be able to help you out.

[Tony P]

Hi Mike, thanks for the advice, so here goes :

One seat
Two wheels
Kickstart shaft
Wiring loom
Side panels and a front mudgard

And that's before I strip the engine and carbs  !!!!!!!

[SteveD CB500K0]

Is that yours Steve ?

It was mine for a few years. At the time I had three 500/4s and had to reduce down to one when I moved house.
I sold it to a local guy who wanted it for his dad!

Steve

[Darkness]

Hi all

Just a quick question.

Did the 1976 400 4 come with cast wheels ?

Thanks

Not unless it was one of the Harrier specials put together by one of the dealers (Mocheck?) with Lester (Or was is it CMA?) Alloys, a small nose fairing, white paint and a 2/4 seat iirc?

May have also been 460cc?