SOHC.co.uk Forums > CB500/550
White field coil wire to stator
Niko:
Hi,...I fitted a combined reg and rec.
The only way I can get it to work is to add a separate switched live to the whites.
I originally fed power to the reg using a black cable only....but no joy.
I assumed the unit would output 12 v to the white wire ?
Can anyone shed any light please.
Niko:
Anyone....before I bugger about with it again
Sent from my iPad using Tapatalk
Bryanj:
If you have put 12 volts into the white wire of the reg/rec you may have fried it.
Niko:
Hi...
It wasn't working before...nothing coming from the 3 yellows on the stator.
That was with a switched feed to the black and a red wire back to battery. White on the stator was to white on the reg rec.....but no voltage at the white
With the white powered up....I get a result from the stator.
I wanted to know if the rec reg should output voltage to the white.....and not need an extra feed.
Bryanj:
The electronic reg/rec, when wired correctly, need no extras inputs. If it does not work it is either defective or wired wrongly which 90% of the time makes it defective. There should have been a wiring diagram with it as colours do not always match with aftermarket units
Navigation
[0] Message Index
[#] Next page
Go to full version