Replaced the needles with brand new ones, put the clip on 3rd gap, cleaned it all and.. it goes much better. Now it struggles a bit on the full throttle.
I didn't manage to check the plugs.
Any advice?
Thanks
el__burro
Sent from my SM-G935F using Tapatalk
to check the plugs gives a good insight of whats happening,
run the bike at constant 6,000rpm on half throttle ,then use the kill switch to stop and pull the plugs out ,check the colour,
as for full throttle,you need to run at least 8,000rpm and full throttle under load ,then do the same,check the plug colours,
as Trigger asked,how many miles has the motor done since rebuild?
maybe leave full speed testing till it has a few hundred miles on it