Author Topic: gap B carburettor fast tickover CB400f  (Read 464 times)

Offline speedibee

  • Newbie
  • Posts: 4
    • View Profile
gap B carburettor fast tickover CB400f
« on: September 20, 2017, 03:25:35 PM »
In my haynes  it says adjust gap B ,that is the screw and lock nut which increases the revs while the choke is on , but it doesn't say what the gap is supposed to be , the actual screw and nut are tucked away between the other mechanisms and would be too hard to get at while fitted to the bike ,so I need to know gap B before I fit the carbs back on .

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8206
    • View Profile
Re: gap B carburettor fast tickover CB400f
« Reply #1 on: September 20, 2017, 06:17:13 PM »
Turn over the page to page 65, No.10. Is says 0-0.3 mm or 0-0.012 inch.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline speedibee

  • Newbie
  • Posts: 4
    • View Profile
Re: gap B carburettor fast tickover CB400f
« Reply #2 on: September 20, 2017, 08:42:56 PM »
Turn over the page to page 65, No.10. Is says 0-0.3 mm or 0-0.012 inch.
Thanks very much  Nursie , I have found it right where you said it was ,,

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8206
    • View Profile
Re: gap B carburettor fast tickover CB400f
« Reply #3 on: September 20, 2017, 08:49:04 PM »
Turn over the page to page 65, No.10. Is says 0-0.3 mm or 0-0.012 inch.
Thanks very much  Nursie , I have found it right where you said it was ,,
Good, I did have to look in the manual myself, not for the gap size, sad as it may seem I knew that but didn't know the page number  ;D
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal