Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
You never know 30 years time I might be on Shed & Buried and you might spot it under a pile of crap.It will give me plenty of time to make up a ridicules back story for it.
Plan on dyeing young then do you.
Going back 2 days.I put the dowels in and as these dowels have oil coming up through them, Trig said that he always fits an ‘O’ ring around the dowel, just in case. This ‘O’ ring is not mentioned anywhere in the service manual and does not come in the gasket set. Trig punched out the hole in the gasket just a little larger to accommodate the seal. I then fitted the gasket, trying it both ways round to make sure I had ‘the best fit’. In fact this pattern gasket set has been very good for sizes, shape, holes in the exact right place etc. I then dropped in the cam blades making sure they located correctly.The extra 'O' ring Trig fitted (Attachment Link)
Quote from: Nurse Julie on January 13, 2018, 05:54:04 PMGoing back 2 days.I put the dowels in and as these dowels have oil coming up through them, Trig said that he always fits an ‘O’ ring around the dowel, just in case. This ‘O’ ring is not mentioned anywhere in the service manual and does not come in the gasket set. Trig punched out the hole in the gasket just a little larger to accommodate the seal. I then fitted the gasket, trying it both ways round to make sure I had ‘the best fit’. In fact this pattern gasket set has been very good for sizes, shape, holes in the exact right place etc. I then dropped in the cam blades making sure they located correctly.The extra 'O' ring Trig fitted (Attachment Link) Can you remember what size the extra o-ring is Julie, and what size did Trig punch out the gasket to. Nice work on the rebuild. Cheers.