Hi all, I'm hoping someone can shed some light on this, I cannot for the life of me remember the breather pipe set up on my 400 so apologies if this is a stupid question but mine were all perished and fell apart.
Does the cam breather route to the airbox (via the 2nd inlet on the plastic chamber)? I'm assuming it should. I can see the airbox and chamber both have vertical breathers so these must exit straight out. However following the cam breather pipe... does this use the T piece and go to the airbox only (my T piece is blocked off) or should it us the T piece and connect to the airbox and also exit out?
I hope this makes sense, its just I'm making new breather pipes and want to cut it first time correctly!