SOHC.co.uk Forums > Project Board

Foot pegs.. for Honda CB.. options?

(1/1)

Integra99:
Hope I can ask this here.. I'm not sure if many of the 70's CB models use the same foot peg design but I'm keen to change the huge rubber foot rests to some more modern ones. I cannot find anywhere that lists the CB400f I wondered if anyone had any links to after market ally type pegs.

taysidedragon:
I've used Bikeit Honda cbr/vfr pegs which are a lot slimmer. I used a spring on the left peg. The right peg is longer to clear the kickstart so I made an extension piece and a sprung ball and plate to hold it up when the kickstart is used. I'll post photos when I have them .

Integra99:

ooh yes please

taysidedragon:
Here are pics of my footpegs. They're a lot lighter and slimmer than the originals.
The pivot is inboard and the peg is bolted to the duralumin extension piece, but it could be welded to it for a cleaner look.

Navigation

[0] Message Index