Author Topic: Dimensions O-ring  (Read 413 times)

Offline deltarider

  • SOHC Master
  • Posts: 1337
  • My kingdom for a turkey!
    • View Profile
Dimensions O-ring
« on: March 25, 2018, 11:11:08 AM »
After more than 40 years the O-ring between the petcock and the fueltank is sweating. That ring is obtainable in the complete strainer set 16952-341-671 for my type petcock that has the nylon filter protruding into the tank. But I don't need the filter nor the nut nor the rubber piece with two holes (all still good), just that O-ring (shown in the middle in the pic below). Does any of you happen to know what size it is? There's a shop in town that does all kinds of O-rings. I could take the old one there, but there's little chance my ring still has its original size after all the different gasolines it has seen. Hence my question. Thanks in advance.
« Last Edit: March 25, 2018, 12:16:38 PM by deltarider »

Offline Seabeowner

  • SOHC Pro
  • Posts: 986
    • View Profile
Re: Dimensions O-ring
« Reply #1 on: March 25, 2018, 01:33:31 PM »
May be this: 16997-467-000 which Honda crazily list as 11.8 x 3.55.
Phil
Phil
1971  CB500K0  Candy Jade Green or Candy Gold
1973  CB500K1  Candy Ruby Red
1975  CB550F1   Shiny Orange
1978  CB550K     Excel Black

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal