Just removed my ropey 4 into 2 exhaust, no idea what make.
Fitted my Motad 4 into 1, the bracket on the Motad stops the center stand but only just.
The very edge on the bracket just stops the very edge of the stand foot and the stand foot the other side is probably only 10mm from the chain.
I have made the clearance bigger for now by fitting a bolt facing the ground in a hole in the bracket so the stand hits the bolt. Does the job but looks a bit naff.
My question is, when these bikes were new, what was there to stop the center stand?
My old exhaust sat lower than the Motad so it was just the silencer stopping the stand.