Author Topic: Inlet manifold o rings??  (Read 489 times)

Offline paulbaker1954

  • SOHC Pro
  • Posts: 696
  • I'll just be 5 minutes dear!!
    • View Profile
Inlet manifold o rings??
« on: May 05, 2018, 07:49:27 PM »
Just on a top end rebuild and confused....

The parts manual shows o rings for the inlet manifolds to head but my K0 USA seems to have not o rings but larger seals

I have sourced a full gasket set from DS but there are no sealing rings like this in the kit but loads of o rings

Thoughts???
« Last Edit: May 05, 2018, 07:53:12 PM by paulbaker1954 »
If you think there's light at the end of the tunnel it's usually another train !!

2016 Yamaha MT09 Tracer
1971 Honda CB500 Four K0

Offline Trigger

  • Grogu
  • *
  • Posts: 8434
  • Engines built on reputation, not advertising.
    • View Profile
Re: Inlet manifold o rings??
« Reply #1 on: May 05, 2018, 08:12:49 PM »
They just look like flattened 0 rings with a tad of sealer added  ;)

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: Inlet manifold o rings??
« Reply #2 on: May 05, 2018, 08:53:01 PM »
I sell them on my eBay page if you get stuck......round O rings that is, not flattened out rubber rings  ;D
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline SteveW

  • SOHC Pro
  • Posts: 583
    • View Profile
Re: Inlet manifold o rings??
« Reply #3 on: May 05, 2018, 09:26:06 PM »
Its the same o-ring that seals the tappet covers on, same part number.

My 550 K0 looked the same as in your pic, new o-rings cured my leak.
1974 CB550 K0
1980 CB650
2000 CBR929RR Fireblade
1966 Lambretta LI150 Series 3
1981 RD350LC
1972 Raleigh Chopper
1974 Raleigh Tomahawk
2011 Henry Hoover

Offline paulbaker1954

  • SOHC Pro
  • Posts: 696
  • I'll just be 5 minutes dear!!
    • View Profile
Re: Inlet manifold o rings??
« Reply #4 on: May 05, 2018, 10:25:14 PM »
Its the same o-ring that seals the tappet covers on, same part number.

My 550 K0 looked the same as in your pic, new o-rings cured my leak.

Cheers big help!!
If you think there's light at the end of the tunnel it's usually another train !!

2016 Yamaha MT09 Tracer
1971 Honda CB500 Four K0

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal