Author Topic: CB550F Rear Wheel  (Read 3392 times)

Offline Dave M

  • SOHC Expert
  • Posts: 408
    • View Profile
CB550F Rear Wheel
« on: September 05, 2007, 09:36:49 PM »
Hi again.

Does anybody know if the rear wheel on a CB550K3 is the same as the one on a CB550F2?

I've checked some parts lists for the K1 and the rim and hub part numbers are the same so I was wondering if the K3 was the same as well as I may have located a wheel.

Thanks,

Dave
Dave
Melbourne.

Offline SteveD CB500K0

  • Administrator
  • SOHC Jedi
  • Posts: 4451
  • Ride on the Steel Breeze...
    • View Profile
    • Steve's Blog
Re: CB550F Rear Wheel
« Reply #1 on: September 06, 2007, 11:58:21 AM »
You could probably get a quick answer from Bryan Jones. I don't know whether he's a member on here but his email is: blj AT blj.org.uk (just take out the spaces and use an "@")

2022 Tiger Sport 660
1971 CB500K0

Offline Dave M

  • SOHC Expert
  • Posts: 408
    • View Profile
Re: CB550F Rear Wheel
« Reply #2 on: September 06, 2007, 01:36:35 PM »
Thanks Steve.
Dave
Melbourne.

Offline Dave M

  • SOHC Expert
  • Posts: 408
    • View Profile
Re: CB550F Rear Wheel
« Reply #3 on: September 25, 2007, 03:16:17 PM »
Well the rear wheel I thought I'd found was no good so has anyone got a wheel from an F2 or perhaps a K3 sitting gathering dust in the corner of their workshop?

Anyone...
Dave
Melbourne.

pistonbroke

  • Guest
Re: CB550F Rear Wheel
« Reply #4 on: September 29, 2007, 08:21:44 PM »
Well the rear wheel I thought I'd found was no good so has anyone got a wheel from an F2 or perhaps a K3 sitting gathering dust in the corner of their workshop?

Anyone...

Hi Dave,i just might be able to help you with that rear wheel,i did have a few but i have sold  a few off of late,i'll have a look and see if i've got one left
                       Perry

Offline Dave M

  • SOHC Expert
  • Posts: 408
    • View Profile
Re: CB550F Rear Wheel
« Reply #5 on: October 13, 2007, 12:30:34 AM »
My wheel is now ready and I'm picking it up tomorrow.

Despite only having 2 hands I've managed to fit my new Marshall Deepthroat system but my exhaust gaskets are stuck in the post.

Thanks guys!
Dave
Melbourne.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal