Clutch cable adjuster

[llessur]

Can anyone please point me towards a supplier of the M10 x 1.25 clutch cable adjuster that sits on the clutch casing. - been struggling with this for several months now to the point it has become one of the last jobs to get the bike finished.

[Orcade-Ian]

Have you tried http://www.400fourbits.co.uk ?

Ian

[llessur]

No joy there I'm afraid. but Steve has helped me with many other bits

[Orcade-Ian]

Is yours missing or just not upto standard?  You don’t actually see the hex on the adjuster as it’s covered with a sleeve, only the nut is visible.  It’s not a difficult item to make on the lathe but I don’t have a 1.25 die, only the more normal 1.5.  A local engineering shop might help you - I can supply dimensions.  I would go stainless if I was making one but make sure you put copper slip or similar where it goes into the alloy cover.


Ian

[eem46]

Hi, maybe a very nice Aftermarket Stainless steel version from Kevin (TTR400).

Kind regards,

Emiel

[rockvegas400]

I got a stainless one from Phil Denton a few years ago. It was reasonably priced, even shipped to Oz.

https://www.phildentonengineering.com/index.html

Cheers,

Justin

[ka-ja]

I have one if you are interested