Author Topic: CB200  (Read 9451 times)

Offline alfiembra

  • SOHC Associate
  • Posts: 51
    • View Profile
Re: CB200
« Reply #15 on: August 19, 2018, 09:45:31 AM »


  just been looking around,and for some reason the PO dismantled the seat lock plunger ,
the one that is rubber mounted on the seat and pushes down into the lock,and the 2 rubber bushes and metal tubular spacers are missing

  part mumbers 772 283 40000  bushes
                        772 293 40000 metal spacers

  both 2 off ,

 obviously I can get them from CMS nl ,but if anyone has a couple spare,please let me know https://www.cmsnl.com/honda-cb200-england_model16413/partslist/F05.html#.WzzbgdJKjIV

  items 38-39

 thanks

Is this what you need John?

The rubbers are no good but everything else is fine, if it’s any use to you, you are welcome to have it pm me if interested.  Alan

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #16 on: January 06, 2019, 03:56:57 PM »

 been doing a little bit of work on the little H ,

 re-built the carbs with Cruzimage kits ,but need the manifold to head "O" rings.

seem to be about 32m OD and just under 3mm dia,

any idea of a source ??
lifelong motorcycle rider,and fan

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: CB200
« Reply #17 on: January 06, 2019, 04:17:00 PM »
Trig has a huge stock of everything rubber John, including O rings. When he's out of the workshop, i will ask him.
Edit....it looks like i managed to find them myself 👍👍👍 [ Guests cannot view attachments ]
« Last Edit: January 06, 2019, 04:22:48 PM by Nurse Julie »
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: CB200
« Reply #18 on: January 06, 2019, 04:57:52 PM »
Will post them in the morning John
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #19 on: January 06, 2019, 06:58:30 PM »
Will post them in the morning John
   drinks are on me at next meet !!!
lifelong motorcycle rider,and fan

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: CB200
« Reply #20 on: January 06, 2019, 07:04:12 PM »
Will post them in the morning John
   drinks are on me at next meet !!!
👍👍👍 xxx
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #21 on: January 10, 2019, 07:29:06 PM »


  quick mention of the help I had from Tri and Nursie ,,

  the 27 x 2.5 mm O rings fitter perfectly.


 but,my Cruzimage carb kits ,the bowl joint seal is not very good,one touch of petrol,and it swells and becomes oversize so it doesn't fit.

 guessing its ethanol ,


 will have to reuse the old ones
lifelong motorcycle rider,and fan

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: CB200
« Reply #22 on: January 10, 2019, 07:50:42 PM »


  quick mention of the help I had from Tri and Nursie ,,

  the 27 x 2.5 mm O rings fitter perfectly.


 but,my Cruzimage carb kits ,the bowl joint seal is not very good,one touch of petrol,and it swells and becomes oversize so it doesn't fit.

 guessing its ethanol ,


 will have to reuse the old ones
The Cruzinimage kits are good John but we always upgrade all the O rings to Viton. This stops the problems you are encountering.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #23 on: January 10, 2019, 07:56:31 PM »


  quick mention of the help I had from Tri and Nursie ,,

  the 27 x 2.5 mm O rings fitter perfectly.


 but,my Cruzimage carb kits ,the bowl joint seal is not very good,one touch of petrol,and it swells and becomes oversize so it doesn't fit.

 guessing its ethanol ,


 will have to reuse the old ones
The Cruzinimage kits are good John but we always upgrade all the O rings to Viton. This stops the problems you are encountering.
It's not an O ring.But a flat shaped gasket type rubber seal

Sent from my SM-G361F using Tapatalk

lifelong motorcycle rider,and fan

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: CB200
« Reply #24 on: January 10, 2019, 08:03:22 PM »


  quick mention of the help I had from Tri and Nursie ,,

  the 27 x 2.5 mm O rings fitter perfectly.


 but,my Cruzimage carb kits ,the bowl joint seal is not very good,one touch of petrol,and it swells and becomes oversize so it doesn't fit.

 guessing its ethanol ,


 will have to reuse the old ones
The Cruzinimage kits are good John but we always upgrade all the O rings to Viton. This stops the problems you are encountering.
It's not an O ring.But a flat shaped gasket type rubber seal

Sent from my SM-G361F using Tapatalk
Oh, it's one of them posh ones. Do you think it was round before it became flat?. Maybe worth contacting Gerben yo see if he has any.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #25 on: January 10, 2019, 08:06:41 PM »
Is he on the forum?
Or have you got contact details?

Thanks

Sent from my SM-G361F using Tapatalk

lifelong motorcycle rider,and fan

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8205
    • View Profile
Re: CB200
« Reply #26 on: January 10, 2019, 08:56:18 PM »
Is he on the forum?
Or have you got contact details?

Thanks

Sent from my SM-G361F using Tapatalk
He is on the forum but best to email him on  gerbenhilly@hotmail.com
Tell him Julie sent you
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #27 on: January 18, 2019, 12:37:25 PM »
quick update,

  no new floatbowl gaskets available ,but the old ones seem leak free ,so far.

 can anyone give me an idea of K number ?
engine number   CB200E-1015807
frame                 CB200- 1014975


did they ever do an orange paint ?? the plastic side panels and tank look far more orange than red
lifelong motorcycle rider,and fan

Offline Moorey

  • SOHC Master
  • Posts: 1666
    • View Profile
Re: CB200
« Reply #28 on: January 19, 2019, 01:09:21 AM »
They look pretty much like the one or lass had years ago.

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: CB200
« Reply #29 on: January 22, 2019, 05:14:48 PM »


  taking these to get re-chromed .

 hopefully will be an improvement
lifelong motorcycle rider,and fan

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal