Author Topic: CB900 K&N Crankcase Breathers  (Read 491 times)

Offline Chris Turl

  • Newbie
  • Posts: 6
    • View Profile
CB900 K&N Crankcase Breathers
« on: May 26, 2018, 10:39:13 AM »
Hi guys,

I'm sure quite a few have already done this, so could anyone help tell me what K&N crankcase filters fit onto a 1981 CB900 F2 engine.
There's quite a few out there, not sure of the clearance to the engine casing on the right hand side, if it needs raising with some tube or not.

Cheers!

Offline K2-K6

  • Grogu
  • *
  • Posts: 5208
    • View Profile
Re: CB900 K&N Crankcase Breathers
« Reply #1 on: May 26, 2018, 11:54:46 AM »
Hi Chris, nice bike the 900 but I'm not sure anyone on the forum currently has one ( unless one is hidden away) . 

I don't think the breather arrangements are the same as the older SOHC motors,  so may be a bit sparse on advice here for that fitment.

Nigel.

Offline Chris Turl

  • Newbie
  • Posts: 6
    • View Profile
Re: CB900 K&N Crankcase Breathers
« Reply #2 on: June 04, 2018, 10:40:18 AM »
Hi Nigel,

Ah right ok cheers for the reply mate, realise it is SOHC forum but have had some help before on here.

Cheers, Chris.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal