Speedo bulb lead/holder

[Johnwebley]

  does anyone know the part number,and/or a source to get a new cable with a decent rubber socket were it fits into the Speedo  ??

  this link is CMSNL.com ,it shows the items,but no number

  https://images.cmsnl.com/img/partslists/honda-cb500k1-four-england-speedometer-tachometer_bigma000083f20_c8e9.gif

[kent400]

I should have one John that's decent. Any idea how long the cable is? Armed with that I have a look it will be FOC of course.

[Bryanj]

They never came separate from a clock Honda probably thought we would fall off and need a new clock before the wiring needed replacement, early clocks had one bulb later had two

[Johnwebley]

I should have one John that's decent. Any idea how long the cable is? Armed with that I have a look it will be FOC of course.

  thanks,just checked ,it connects with the loom in the headlamp,I guesstamate it about 1ft long,the  spedo is a 500 K1 single bulb,

 I intend to get in touch in a few months,I have a CB200 that needs its dials refurbed


 thanks

[kent400]

Yep got one, it's 14 inches long but you will be able to loose a couple of inches if necessary.  Single bulb holder of course and it looks like it has never been used. I'll get it off to you.

[Johnwebley]

Yep got one, it's 14 inches long but you will be able to loose a couple of inches if necessary.  Single bulb holder of course and it looks like it has never been used. I'll get it off to you.

  many thanks