Author Topic: Driver plus, meaning JIS or ordinary Phillips?  (Read 587 times)

Offline deltarider

  • SOHC Master
  • Posts: 1337
  • My kingdom for a turkey!
    • View Profile
Driver plus, meaning JIS or ordinary Phillips?
« on: September 13, 2018, 12:39:00 PM »
The crosshead screwdrivers in the Honda toolbag are described: DRIVER, PLUS, #2 and DRIVER, PLUS, #3. Are both 2 and 3 ment to be JIS or Phillips? And do 2 and 3 mean 2 and 3 mm?

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: Driver plus, meaning JIS or ordinary Phillips?
« Reply #1 on: September 13, 2018, 01:47:16 PM »
They would be JIS.  #2 and #3 are equivalent to PH2 and PH3; Phillips sizes.
Where's that 10mm socket got to?

Offline deltarider

  • SOHC Master
  • Posts: 1337
  • My kingdom for a turkey!
    • View Profile
Re: Driver plus, meaning JIS or ordinary Phillips?
« Reply #2 on: September 13, 2018, 02:55:35 PM »
Thanks Mike. I'd better straighten that old driver then and not bin it. I suppose 2 and 3 mean mm.

Offline Moorey

  • SOHC Master
  • Posts: 1666
    • View Profile
Re: Driver plus, meaning JIS or ordinary Phillips?
« Reply #3 on: September 13, 2018, 03:39:45 PM »
I got these a while ago and seem good for the price. I haven't had one screw cam out since. From Ebay £20

Werkzeug JIS Screwdriver Set
No2 x 38 mm long,
◦No1 x 75 mm long,
◦No2 x 100 mm long, 
◦No3 x 150 mm long

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal