Author Topic: spare top end for 400/4  (Read 3248 times)

Offline matthewmosse

  • SOHC Master
  • Posts: 2161
    • View Profile
spare top end for 400/4
« on: March 11, 2008, 08:37:57 PM »
Hi, I've a cb400/4 head, had good compression when fitted and jornal bearings but 2 rocker cover screws snapped off in head due to crash damage. Still quite useable as a spare or replacement and I could do with the space, I think the rocker cover is still there too. Could be of use.
Got a 500/4 with rust and a sidecar and loadsa bits. nice and original and been round the clock

ianwrong

  • Guest
Re: spare top end for 400/4
« Reply #1 on: May 31, 2008, 06:58:14 PM »
hey,you're selling yr cb400/4 head or looking for spare,if you're selling i m interested.

Offline matthewmosse

  • SOHC Master
  • Posts: 2161
    • View Profile
Re: spare top end for 400/4
« Reply #2 on: May 31, 2008, 11:02:48 PM »
Selling, its in a cuppord in a box, needs a clean I'd geuss (still 2 6mm bolts still in there snapped off.) rocker cover casting was dead but all internals were good. I'd want about
Got a 500/4 with rust and a sidecar and loadsa bits. nice and original and been round the clock

Offline SteveD CB500K0

  • Administrator
  • SOHC Jedi
  • Posts: 4443
  • Ride on the Steel Breeze...
    • View Profile
    • Steve's Blog
2022 Tiger Sport 660
1971 CB500K0

Offline matthewmosse

  • SOHC Master
  • Posts: 2161
    • View Profile
Re: spare top end for 400/4
« Reply #4 on: June 01, 2008, 08:17:14 PM »
Geuss postage would be very steep too.
Got a 500/4 with rust and a sidecar and loadsa bits. nice and original and been round the clock

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal