Author Topic: 750k1 wheel spindle binding?  (Read 562 times)

Offline Arch stanton

  • SOHC Expert
  • Posts: 411
    • View Profile
750k1 wheel spindle binding?
« on: November 03, 2018, 02:30:52 PM »
Just trying to install the front spindle.
But as soon as I get the spindle nut even hand tight.
The spindle binds.
Anyone any ideas what may be wrong?
Sean.

Offline hairygit

  • SOHC Jedi
  • Posts: 2708
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #1 on: November 03, 2018, 02:33:47 PM »
Try putting the nut on the other way round !

Sent from my X6pro using Tapatalk

If it's got tits or wheels, it's hassle, if it's got both, RUN!!!

Offline Arch stanton

  • SOHC Expert
  • Posts: 411
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #2 on: November 03, 2018, 02:50:34 PM »
The nut is the right way. Spanner side inwards.

Offline Bryanj

  • Grogu
  • *
  • Posts: 10694
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #3 on: November 03, 2018, 03:09:57 PM »
Speedo drive not located correctly or bad bearings

Offline Arch stanton

  • SOHC Expert
  • Posts: 411
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #4 on: November 03, 2018, 03:36:26 PM »
Everything looks to be good.
But something obviously isn't.

Offline Arch stanton

  • SOHC Expert
  • Posts: 411
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #5 on: November 03, 2018, 04:12:08 PM »
All sorted now.
It was only one of those Derrrr! Moments that strike when too tired.
Thank you any way.
Sean.

Offline Bryanj

  • Grogu
  • *
  • Posts: 10694
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #6 on: November 03, 2018, 04:14:54 PM »
So do tell!!

Offline Arch stanton

  • SOHC Expert
  • Posts: 411
    • View Profile
Re: 750k1 wheel spindle binding?
« Reply #7 on: November 03, 2018, 05:21:34 PM »
Double discs convertion bolts in the wrong way round.
So the nuts caught the speedo drive.
Derrrr!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal