Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Make sure the negative lead of the battery has a very clean connection to earth. Mine didn't so the current went down the small earth wire in the main loom and melted it.
use some heat on the post pins and be very careful. I have some carb bodies if you need one if i have the correct one, what number carb is it?
i have a set with one carb worse than yours, i think on mine it was the end one but cant remember which one, will check and let you know. they are numbered from the left side of bike as you sit on it, the carb with the choke control is number 1.
Best tip I can give you is buy a decent set of JIS screwdrivers, all the cross headed screws which are JIS will have a small punch mark on the head, JIS screwdrivers are a perfect fit for these screws and you risk rounding them off with a normal Phillips screwdriver.Decent set for a decent price here. https://ruggedroads.co.uk/epages/00cbb604-5d1c-407e-8207-580e14387ec5.sf/en_GB/?ObjectPath=/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/Products/%2212705/6/8%22
ok this is a number 2 carb, looks to be in sound condition. Yours for a donation to the site