Hello to you my learned colleagues, I had a problem with the starter clutch and after stripping found the springs were completely knackered. I replaced them with new springs and all was good. The bike has stood for about 3 years since then due to the build. Everything is all back together again and I recently tried to get the engine running again. The clutch was working as it should for quite a few spins then suddenly it went back to sounding like a bag of spanners again and refused to turn over the engine. I have stripped it again and can't visibly see or feel anything wrong with the clutch assembly but I did find the large clutch sprocket to be floating on the spindle. It engages as it should but this float is now worrying me, should there be some sort of spacer there to stop this floating? I hope the pictures explain my problem better.