any takers

[2 for the soul]

Ka-ja- those Amal carbs, what bore are they? Had a look at the website and there’s loads of different sizes etc. Did you fabricate a bracket to hold them all together?
Cheers

[ka-ja]

The present ones fitted are MK 2 24mm (into gas flowed inlet tracts) and I made a simple bracket out of small section alloy, the chokes are linked with a flat alloy bar, throttles are via a 1 into 4 adapter. The biggest problem you will have is making the inlet flanges/stubs to take the amal mounting rubbers.

[ricardo]

My better half never says that. She's usually still out on the town when I roll back!!!
Ricardo