Author Topic: JIS screws.  (Read 865 times)

Offline royhall

  • SOHC Jedi
  • Posts: 3380
  • Keep biking I'm not quite bankrupt yet
    • View Profile
JIS screws.
« on: October 06, 2019, 10:38:39 AM »
Anyone know of a source for JIS screws that hasn't been mentioned already. I am looking for an M6*90mm, just one. Had a look at Ash's recommend but there is nothing that long on there. I know it shouldn't bother me but having one cap head screw in the clutch cover just bugs me. ;D
Current bikes:
TriBsa CCM 350 Twin
Honda CB350F in Candy Bacchus Olive
Honda CB750F2 in Candy Apple Red
Triumph Trident 660 in Black/White
Triumph T100C
Suzuki GS1000HC
Honda CB450K0 Black Bomber
Honda CB750K5 in Planet Blue Metallic (Current Project)

Offline hairygit

  • SOHC Jedi
  • Posts: 2708
    • View Profile
Re: JIS screws.
« Reply #1 on: October 06, 2019, 10:46:58 AM »
Still available from Honda, part number 9350006090, CMS have then listed in stock for 1 euro 50 each, so any Honda dealer should be able to get one.
If it's got tits or wheels, it's hassle, if it's got both, RUN!!!

Offline Laverda Dave

  • SOHC Jedi
  • Posts: 2531
  • Health is wealth
    • View Profile
Re: JIS screws.
« Reply #2 on: October 06, 2019, 10:47:08 AM »
Difficult to get hold of Roy, I bought one from my local Honda emporium in the end (different size to yours but still a size I could get hold of anywhere else).
1976 Honda 400/4
1977 Rickman Honda CR750
1999 Honda VFR 800FX
1955 750 Dresda Triton
1978 Moto Morini 350 Sport
1978 Honda CB400/4 'Rat' bike
1982 Laverda 120 Jota

Offline royhall

  • SOHC Jedi
  • Posts: 3380
  • Keep biking I'm not quite bankrupt yet
    • View Profile
Re: JIS screws.
« Reply #3 on: October 06, 2019, 10:54:02 AM »
Yep I noticed stock at CMS but one screw will end up costing about £18 even more probably from 1st November (sshhh the B word). May just put up with it until the next order with CMS or The Pirate. Thats unless anyone has an M6*90mm sitting in a bag that they could be relieved of.
Current bikes:
TriBsa CCM 350 Twin
Honda CB350F in Candy Bacchus Olive
Honda CB750F2 in Candy Apple Red
Triumph Trident 660 in Black/White
Triumph T100C
Suzuki GS1000HC
Honda CB450K0 Black Bomber
Honda CB750K5 in Planet Blue Metallic (Current Project)

Offline royhall

  • SOHC Jedi
  • Posts: 3380
  • Keep biking I'm not quite bankrupt yet
    • View Profile
Re: JIS screws.
« Reply #4 on: October 06, 2019, 11:19:58 AM »
Just noticed "zedparts" on eBay sell a complete range of JIS pattern screws in stainless. They also sell kits for some Honda's.  https://www.ebay.co.uk/str/zedparts
Current bikes:
TriBsa CCM 350 Twin
Honda CB350F in Candy Bacchus Olive
Honda CB750F2 in Candy Apple Red
Triumph Trident 660 in Black/White
Triumph T100C
Suzuki GS1000HC
Honda CB450K0 Black Bomber
Honda CB750K5 in Planet Blue Metallic (Current Project)

Offline Trigger

  • Grogu
  • *
  • Posts: 8434
  • Engines built on reputation, not advertising.
    • View Profile
Re: JIS screws.
« Reply #5 on: October 06, 2019, 11:51:08 AM »
My stock of JIS only goes up to 80mm but, 90mm are available in the smallest pack of 10  ;)

Or as a single >> https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_93500060900A/
« Last Edit: October 06, 2019, 11:54:01 AM by Trigger »

Offline royhall

  • SOHC Jedi
  • Posts: 3380
  • Keep biking I'm not quite bankrupt yet
    • View Profile
Re: JIS screws.
« Reply #6 on: October 06, 2019, 11:56:56 AM »
Thanks Trig. Have sorted it now with zedparts. Have also ordered a set of JIS screws for the GS1000 to get rid of the cap heads.
Current bikes:
TriBsa CCM 350 Twin
Honda CB350F in Candy Bacchus Olive
Honda CB750F2 in Candy Apple Red
Triumph Trident 660 in Black/White
Triumph T100C
Suzuki GS1000HC
Honda CB450K0 Black Bomber
Honda CB750K5 in Planet Blue Metallic (Current Project)

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal