Author Topic: Air filter box panching plates and gauze filter  (Read 654 times)

Offline 10tenmen

  • SOHC Associate
  • Posts: 79
  • A good old un.
    • View Profile
Air filter box panching plates and gauze filter
« on: September 06, 2019, 04:56:33 PM »
Hi after reading a post earlier I realised I didn’t have the lower air filter part on my bike I only had the breather chamber which was not connected.
It consists of the breather pipe from the head to the chamber then it filters gasses back up into the air filter box, this is all situated below the filter area.
I managed to source the panching plate A, our good Nurse Julie posted how to make a filter from a scourer and I then made the panching plate B from the inside of a used air filter as this part is discontinued.
The parts in the diagram are numbers 24, 25 & 26

Offline 10tenmen

  • SOHC Associate
  • Posts: 79
  • A good old un.
    • View Profile
Re: Air filter box panching plates and gauze filter
« Reply #1 on: September 06, 2019, 04:57:14 PM »
Last pic of panching plate B.
This is why I like this forum so much information lol
« Last Edit: September 06, 2019, 04:59:00 PM by 10tenmen »

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal