Author Topic: CB650 project in boxes  (Read 337 times)

Offline seanr68

  • Newbie
  • Posts: 4
    • View Profile
CB650 project in boxes
« on: September 12, 2019, 12:31:54 PM »
Hi Guys n Gals

Hi have a stripped down CB650 project for sale.
Its a complete bike albeit in boxes, frame, forks and swingarm assembled loosely.
Engine was a good runner with slight top end rattle 3 years ago...it has been stood in a warm, dry garage.
All the parts are there with the exception of the rear wheel rim, old one was U/S.
I've lost enthusiasm and a new job means I have even less time to complete.
There has been some minor mod that are easily reversible. Seat bracket was cut with the view of fitting a single seat. Swingarm has been braced but only tack welded in place.
First picture shows bike as it was when i bought it.

I'm in Dewsbury, West Yorkshire
Asking £150 ono
Buyer to collect....You will likely need a small van.
Unable to post/deliver.
pm for further details.

« Last Edit: September 12, 2019, 01:02:49 PM by seanr68 »

Offline andy120t

  • SOHC Expert
  • Posts: 319
    • View Profile
Re: CB650 project in boxes
« Reply #1 on: September 12, 2019, 12:43:16 PM »
Hi, I've sent a PM. I'm interested! Andy.
andy120t

CB650 project
CB400F frame - just missing a few bits...
ZX6R
GSXR 7/11
Triumph 5TA
CB900FZ

Offline seanr68

  • Newbie
  • Posts: 4
    • View Profile
Re: CB650 project in boxes
« Reply #2 on: October 07, 2019, 12:44:26 PM »
This bike is still available folks.
I need it gone to make room for a fridge so first £100 takes it.

Cheers

Offline seanr68

  • Newbie
  • Posts: 4
    • View Profile
Re: CB650 project in boxes
« Reply #3 on: October 14, 2019, 10:50:09 PM »
No longer available.
Thanks for all enquiries.