SOHC.co.uk Forums > CB500/550
Swing Arm Fitment
Dodgy:
What swing arm can I fit to my 550k frame, I have a 750 sohc drumbrake model arm will this fit ok, has anyone done this or something similar?
SteveD CB500K0:
I doubt it. Why don't you offer it up and see what the obvious differences are?
Bryanj:
is that a UK K3 or a us K1/2
Seamus:
May be worth looking here http://www.motogrid.com/pages/parts/viewbybrand/7/honda.aspx to check the part numbers. It is possible that they are the same
Dodgy:
--- Quote from: Bryanj on February 12, 2009, 09:57:09 AM ---is that a UK K3 or a us K1/2
--- End quote ---
Im assuming its a uk k3, bought the frame on fleabay as the other one I have has been butchered to make a chop. I am trying to build a standard looking 550 from this. Paid 37 quid for it. Was going to keep it as a chop but decided standard would be better. Will post picture of it half renovated as a chop before i decided to go the standard route :)
Navigation
[0] Message Index
[#] Next page
Go to full version