Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Clean crisp images from Trigger that .99p phone must be working a treat
Quote from: Trigger on February 04, 2020, 07:58:39 AMQuote from: paul G on February 04, 2020, 07:52:49 AMClean crisp images from Trigger that .99p phone must be working a treat No good as a phone Paul but, it is a great camera for 99p Phone probably OK just no signal where you live
Quote from: paul G on February 04, 2020, 07:52:49 AMClean crisp images from Trigger that .99p phone must be working a treat No good as a phone Paul but, it is a great camera for 99p
Was going to post but.......
Hi Trigger, found this yesterday, what great write up of what I would call a very difficult proposition doing the bike for £1K. I notice that you are building up the motor in the frame is this something that I could do with my CB750 K3 or do I have to wrestle with the engine putting it back. Anyway keep with the posting its great to read how it should be done.
Quote from: SteveCB750 on February 10, 2020, 10:05:58 AMHi Trigger, found this yesterday, what great write up of what I would call a very difficult proposition doing the bike for £1K. I notice that you are building up the motor in the frame is this something that I could do with my CB750 K3 or do I have to wrestle with the engine putting it back. Anyway keep with the posting its great to read how it should be done. Sadly Steve, unless you cut the top frame tubes on a 750, you can only install the motor unit complete. Or install a 'gordons frame kit' or similar...
A fantastic read Trigger, it's coming on well.Who did the brake shoe relining, I need to get the shoes for my Triton relined as I cannot get replacement shoes. Does the person you use also offer a brake drum skimming service to match the shoes to the drum (preferably with the tyre in situ)? I think my drum has been pulled out of true when the stainless spokes were fitted.ThanksDave