Chrome Clock base cover - plate screws?

[Andrew-S]

The part number for the little M3x8 pan screws that hold on the chrome clock base covers is 93500-03005-08 but doesn't show up on a search on the DS website or CMSNL and Yamiya.    

Andy Cepok shows them at £1.26 each plus £6+ postage, albeit with a different part number:  https://www.ebay.co.uk/itm/Honda-CB-750-Four-K0-K1-K2-Screw-Pan-Chrome-Gauge-Covers-New-Orig/293254900211?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

But from my previous experience of dealing with Cepok which was not good I'm reluctant to deal with them - grateful if someone could  please point me to a supplier than can supply them?

Thanks,
Andrew

[Trigger]

You have to be careful with 8mm long screws, some will touch the parts in the clock so always measure the old ones 

[Andrew-S]

You have to be careful with 8mm long screws, some will touch the parts in the clock so always measure the old ones 

You're right, just checked the Part Book and the number is M3x5 thanks!

[Trigger]

You have to be careful with 8mm long screws, some will touch the parts in the clock so always measure the old ones 

You're right, just checked the Part Book and the number is M3x5 thanks!

The parts book maybe wong as, there are two types of clocks. Always measure the original ones 

RS do JIS in chrome but they don't list the length. I have spoken to them about listing the length but no joy and I have forgot what they said the length of these ones were. Always worth emailing them to ask. LINK >>>https://uk.rs-online.com/web/p/machine-screws/4899315/

[Andrew-S]

You have to be careful with 8mm long screws, some will touch the parts in the clock so always measure the old ones 

You're right, just checked the Part Book and the number is M3x5 thanks!

The parts book maybe wong as, there are two types of clocks. Always measure the original ones 

RS do JIS in chrome but they don't list the length. I have spoken to them about listing the length but no joy and I have forgot what they said the length of these ones were. Always worth emailing them to ask. LINK >>>https://uk.rs-online.com/web/p/machine-screws/4899315/

Thanks for tip and the lead. 

[Trigger]

You have to be careful with 8mm long screws, some will touch the parts in the clock so always measure the old ones 

You're right, just checked the Part Book and the number is M3x5 thanks!

The parts book maybe wong as, there are two types of clocks. Always measure the original ones 

RS do JIS in chrome but they don't list the length. I have spoken to them about listing the length but no joy and I have forgot what they said the length of these ones were. Always worth emailing them to ask. LINK >>>https://uk.rs-online.com/web/p/machine-screws/4899315/

Thanks for tip and the lead. 

If you get any result with RS, I will go halves on a packet with you. 5 or 6mm will do the job 

[Andrew-S]

If you get any result with RS, I will go halves on a packet with you. 5 or 6mm will do the job 

Yep, sorted via their webchat - no 5mm, but the M3x6 part number is: 4899309 (your previous link was for 8mm)-
https://uk.rs-online.com/web/p/machine-screws/4899309/?relevancy-data=636F3D3126696E3D4931384E525353746F636B4E756D626572266C753D656E266D6D3D6D61746368616C6C26706D3D5E2828282872737C5253295B205D3F293F285C647B337D5B5C2D5C735D3F5C647B332C347D5B705061415D3F29297C283235285C647B387D7C5C647B317D5C2D5C647B377D2929292426706F3D3126736E3D592673723D2673743D52535F53544F434B5F4E554D4245522677633D4E4F4E45267573743D34383939333039267374613D3438393933303926&searchHistory=%7B%22enabled%22%3Atrue%7D

I won't need them all - if you PM me an address I'll happily send half of them foc.

Cheers,
Andrew

[adespin]

That's a good price for 100 = £5.14 and free postage , i didn't realise that RS sold nuts and bolts, thought it was only electronics, i will be looking there in future.