Author Topic: 350 / 400 Float Bowl O rings  (Read 294 times)

Offline Moorey

  • SOHC Master
  • Posts: 1194
    • View Profile
350 / 400 Float Bowl O rings
« on: January 08, 2020, 08:45:25 PM »
Anyone know the o-ring size for the float bowls on the 350/400.  Ta.
« Last Edit: January 12, 2020, 05:50:40 PM by Moorey »

Offline Moorey

  • SOHC Master
  • Posts: 1194
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #1 on: January 12, 2020, 05:51:17 PM »
Bump.

Offline Nurse Julie

  • 1973 CB750 UK K2.1977 CB550/4 Mongrel Brat. 1978 CB400/4.
  • SOHC Jedi
  • Posts: 5519
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #2 on: January 12, 2020, 05:54:51 PM »
No idea Chris.... I always buy mine direct from Gerben.
Im a Nurse, trust me, this won't hurt.....much !!!

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline awrawr

  • Newbie
  • Posts: 8
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #3 on: January 12, 2020, 10:10:39 PM »
I have some in a packet with a label on it stating the size..... when I can find it. Watch this space...

Offline Moorey

  • SOHC Master
  • Posts: 1194
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #4 on: January 12, 2020, 10:19:24 PM »
I have some in a packet with a label on it stating the size..... when I can find it. Watch this space...

Cheers and welcome to the forum. :)

Offline H2Eric

  • SOHC Member
  • Posts: 117
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #5 on: January 13, 2020, 11:30:57 AM »
I always use the shaped ones, which can usually be found on flea-bay.

Eric



Offline awrawr

  • Newbie
  • Posts: 8
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #6 on: January 13, 2020, 08:11:30 PM »
Thank you. I've been on the US site for a while 'cos I couldn't find this one!

The bowl takes a 63mm x 2.0mm. A 2.5mm will fit but I think they're a touch too fat, stopping the faces from mating properly and risking warping the joint.


Offline Moorey

  • SOHC Master
  • Posts: 1194
    • View Profile
Re: 350 / 400 Float Bowl O rings
« Reply #7 on: January 13, 2020, 10:38:22 PM »
Thank you.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal