Author Topic: Cam chain tensioner bolt  (Read 590 times)

Offline AndyD

  • Newbie
  • Posts: 48
    • View Profile
Re: Cam chain tensioner bolt
« Reply #15 on: February 10, 2020, 10:00:06 AM »
Dave,
I agree, the kit seems well made and so far easy enough to fit.
The oven I got was an Electriq 70 liter one- it was the cheapest one I could find with a 13amp plug and available quickly - only used it briefly so far but seems fine and CB400F crankcases fit in sitting flat on the mesh shelf which is handy.
Welcome to use it if you're not too far - it's one of those things that won't get much use but really handy to have in the shed now and then I guess.
Have to admit I've never even dreamed of trying to use the o/h oven or dishwasher - I'd never get away with it!
Cheers,
Andy

Offline Laverda Dave

  • SOHC Master
  • Posts: 1140
  • Health is wealth
    • View Profile
Re: Cam chain tensioner bolt
« Reply #16 on: February 10, 2020, 06:03:39 PM »
Thanks Andy.
The dishwasher is very handy to clean wiring looms, and they come up like new! Make sure you use a dishwasher cleaning solution afterwards though and before the o/h gets home!
1976 Honda 400/4
1977 Honda 400/4
1981 Honda CB250RSA
1977 Rickman Honda CR750
1999 Honda VFR 800FX
1955 750 Dresda Triton
1978 Moto Morini 350 Sport
1982 Laverda 120 Jota
1924 Triumph 550SD
2012 Stanley Battery Drill

Offline waffey

  • SOHC Associate
  • Posts: 89
    • View Profile
Re: Cam chain tensioner bolt
« Reply #17 on: February 15, 2020, 10:44:06 AM »
Had my lower engine case returned from the engineering shop with the snapped cam tensioner bolt removed, redrilled with the Ebay replacement. All good
Bikes:
Suzuki Address 110 Scooter
Suzuki TL1000s
BMW R1200GS LC
Honda CB400 F2 1977 (restoration started)

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal