Author Topic: CB750 K6 Reg/Rec Help  (Read 135 times)

Offline jamesw999

  • Newbie
  • Posts: 8
    • View Profile
CB750 K6 Reg/Rec Help
« on: February 27, 2020, 11:36:37 PM »
Hi All,

Has anyone ever installed a new reg/rec? I am pretty happy with the 3 yellow wires, the red and the green, but I am left with a black that splits into two temrinals? I think one goes to the white from the alternator and the other may go to the aux on the m-unit, which acts as an excitable current ( I think). In the original OEM diagram this would have been the rear break switch, I might be wrong.

Also have other questions in the pic if any one has time.

[ Guests cannot view attachments ]

Any help gratefully received.

James

Offline eight0

  • SOHC Associate
  • Posts: 93
    • View Profile
Re: CB750 K6 Reg/Rec Help
« Reply #1 on: February 28, 2020, 09:29:58 AM »

Most of the aftermarket reg/recs I've seen have a separate white and a separate black wire. The white goes to the alternators white wire and the black goes to switched power. you could run it to the M-Units ignition input.

The white wire provides power to the field coil. I guess this could be provided by switched power but not sure.  I'm sure someone on here with more knowledge than me will chip in.
1x 1976 CB550F1
1x KTM EXC 200
1x KTM EXC 300
1x CBR600 FW
1x CX500
1x Honda Bros (For Sale)

Offline jamesw999

  • Newbie
  • Posts: 8
    • View Profile
Re: CB750 K6 Reg/Rec Help
« Reply #2 on: February 28, 2020, 08:18:24 PM »
Thanks you, I’ll give that a try  :D

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal