Author Topic: DSS coils - connections  (Read 459 times)

Offline JezzaPeach

  • SOHC Expert
  • Posts: 384
  • CB500/4 K1 1972 gold
    • View Profile
DSS coils - connections
« on: February 24, 2020, 07:20:47 PM »
Any advice on correct connection for DSS coils very welcome.

I’m putting on DSS coils. They have + and - spade terminals and come with a set of leads, yellow and black (I assume to plug on + and - respectively) both going to male bullet connectors. The originals have one male bullet (black and white - negative?) and one female bullet (right coil blue - positive?) (left coil yellow - positive?) 

Apart from the above colour queries, I’ll have to get a double ended female adaptor if there is such a thing (?), or cut off and adapt the old ones.
1972 CB500/4 K1 Gold
Wanted: my 500/4 UGP96M
from 1975-78. Garnet Brown.

Offline Bryanj

  • Grogu
  • *
  • Posts: 10694
    • View Profile
Re: DSS coils - connections
« Reply #1 on: February 24, 2020, 07:46:58 PM »
Wrong! Black goes to black/white and is power in +ve,  Yellows go to yellow and blue (points) and is ground/earth
 -ve

Offline JezzaPeach

  • SOHC Expert
  • Posts: 384
  • CB500/4 K1 1972 gold
    • View Profile
Re: DSS coils - connections
« Reply #2 on: February 24, 2020, 08:46:53 PM »
Many thanks. Well I never! At least I was getting the colours right.
1972 CB500/4 K1 Gold
Wanted: my 500/4 UGP96M
from 1975-78. Garnet Brown.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal