Author Topic: Handlebar wiring direction help  (Read 486 times)

Offline 4wDaz

  • SOHC Member
  • Posts: 110
    • View Profile
Handlebar wiring direction help
« on: April 29, 2020, 02:11:27 PM »

Hi guys I’m currently putting a bike together that I didn’t strip down and need a bit of help regarding the handlebar wiring route and how the two bundles of wires run when they exits the hole in the middle of the handlebars, I’ve tried to look at pictures online but some run the pair of wires to the left hand side of the ignition switch and some split them and run one to the left and one to the right. Id like to run them as the factory did so if anyone can offer any help it would be appreciated, thanks Daz  :)
Genuine And Aftermarket Motorcycle Parts Supplier

Offline Deano400

  • SOHC Expert
  • Posts: 481
    • View Profile
Re: Handlebar wiring direction help
« Reply #1 on: April 29, 2020, 02:14:31 PM »
This should help.

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8206
    • View Profile
Re: Handlebar wiring direction help
« Reply #2 on: April 29, 2020, 02:32:35 PM »
After they come out of the handlebar hole, both then go over the top frame tube, go around by the left hand tank rubber, there should be a clip to hold them.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline 4wDaz

  • SOHC Member
  • Posts: 110
    • View Profile
Re: Handlebar wiring direction help
« Reply #3 on: April 29, 2020, 02:38:06 PM »
So one to the left and one to the right of the ignition switch then. Thanks very much  :)
Genuine And Aftermarket Motorcycle Parts Supplier

Offline Deano400

  • SOHC Expert
  • Posts: 481
    • View Profile
Re: Handlebar wiring direction help
« Reply #4 on: April 29, 2020, 02:44:28 PM »
Yes. This may be a bit clearer.

Offline 4wDaz

  • SOHC Member
  • Posts: 110
    • View Profile
Re: Handlebar wiring direction help
« Reply #5 on: April 29, 2020, 02:51:11 PM »
Perfect thanks again  :)
Genuine And Aftermarket Motorcycle Parts Supplier

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal