Author Topic: What do I need to fix my oil leaks?  (Read 2502 times)

Offline Bryanj

  • Grogu
  • *
  • Posts: 10796
    • View Profile
Re: What do I need to fix my oil leaks?
« Reply #30 on: May 24, 2020, 06:01:21 PM »
It would be better to replace the base gasket and O rings now as they will only leak later

Offline Drew400

  • SOHC Pro
  • Posts: 512
  • 400/4 I restored
    • View Profile
Re: What do I need to fix my oil leaks?
« Reply #31 on: May 24, 2020, 06:03:26 PM »
Thanks BryanJ. I guessed as much, but always nice to hear from a real expert! Cheers, D.
Previous bikes:Puch Maxi 50, CD175, Suzuki T500, CX500, Z200, GS850, XS1100, GT750 (kettle), RD400, GTR1000 (not too many boastables in there!), CB750F2 Phil Read Replica

Offline Bryanj

  • Grogu
  • *
  • Posts: 10796
    • View Profile
Re: What do I need to fix my oil leaks?
« Reply #32 on: May 24, 2020, 08:01:27 PM »
Is that ex as in used to be and spurt as in drip under pressure?
Following a few threads on the board it would probably be best to check the rings anyway

Offline Drew400

  • SOHC Pro
  • Posts: 512
  • 400/4 I restored
    • View Profile
Re: What do I need to fix my oil leaks?
« Reply #33 on: May 24, 2020, 11:19:24 PM »
Ha ha, quite so!  ;D
Previous bikes:Puch Maxi 50, CD175, Suzuki T500, CX500, Z200, GS850, XS1100, GT750 (kettle), RD400, GTR1000 (not too many boastables in there!), CB750F2 Phil Read Replica

Offline Drew400

  • SOHC Pro
  • Posts: 512
  • 400/4 I restored
    • View Profile
Re: What do I need to fix my oil leaks?
« Reply #34 on: May 26, 2020, 04:41:09 PM »
Now fitting a new genuine Honda cylinder base gasket.

Is there any reason why it's green on one side and blue on the other (i.e. does it matter which way up it goes, as it fits properly both ways up)?

Ta, D.
Previous bikes:Puch Maxi 50, CD175, Suzuki T500, CX500, Z200, GS850, XS1100, GT750 (kettle), RD400, GTR1000 (not too many boastables in there!), CB750F2 Phil Read Replica

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal