Author Topic: Rocker shafts  (Read 385 times)

Offline oldtuggie

  • SOHC Associate
  • Posts: 62
    • View Profile
Rocker shafts
« on: May 30, 2020, 09:26:07 AM »
Hi
Can anyone confirm that I have fitted my Rocker shafts correctly.
I have fitted both the inner and outer shafts with the threaded ends of the shafts facing outwards towards the end caps, is this correct.
Thanks in advance for any replies

Offline Trigger

  • Grogu
  • *
  • Posts: 8434
  • Engines built on reputation, not advertising.
    • View Profile
Re: Rocker shafts
« Reply #1 on: May 30, 2020, 10:05:51 AM »
Hi
Can anyone confirm that I have fitted my Rocker shafts correctly.
I have fitted both the inner and outer shafts with the threaded ends of the shafts facing outwards towards the end caps, is this correct.
Thanks in advance for any replies

Threaded end = outer facing. That is how you insert the tool to pull them out   ::)

Offline oldtuggie

  • SOHC Associate
  • Posts: 62
    • View Profile
Re: Rocker shafts
« Reply #2 on: May 30, 2020, 03:07:21 PM »
Thanks
Just about to get engine into the frame and this doubt came into mind for some reason , I'll get on with it now I know they are correct

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal