Its ages ago i started the re-build for the 550. In fact I have built a couple of other bikes since..... So its the same old story - many years after the re-build started I finally returned to finish it. The frame & bits have all been powder coated etc so its been well apart and now nearly all back together again. Almost.
There is a earth strap from the engine to the battery. Which is good. But was there an earth strap from the engine to frame and/or a earth point on the wiring loom. The wiring diagram shows a earth point. So I need to earth it somewhere. I cannot find an earthing wire from the loom. Was it a bullet connector and wire to frame.
Digital cameras make re-builds much easier nowadays. Back in 1995 when I started to fix the 550 the cameras were a bit pricey.
Ta
Nairb