Author Topic: 750 f2 carb removal  (Read 472 times)

Offline sohc bob

  • Newbie
  • Posts: 34
    • View Profile
750 f2 carb removal
« on: August 03, 2020, 07:34:14 PM »
Hi all
        Is there a specific side to pull the carbz out from a 750 f2 which makes it easier also anyone brought throttle cables for the f2 from david silvers if so are they any good

Offline whiteylfc

  • SOHC Associate
  • Posts: 75
  • Triumph Tiger 800,CB750 Honda Britain,CB750 PRR x
    • View Profile
Re: 750 f2 carb removal
« Reply #1 on: August 04, 2020, 05:15:31 PM »
Either side is good to take them out and put them in.Theyre a pig to get back on, particularly if the rubber inlet tubes have hardened off...good luck..

Offline Spitfire

  • SOHC Master
  • Posts: 1775
    • View Profile
Re: 750 f2 carb removal
« Reply #2 on: August 04, 2020, 06:55:10 PM »
Usually I remove the airbox undo the clips and cables and push down first, as to throttle cables I got mine (F1) from Silvers and have not had any problems, mind you this was way back in 2007.

Cheers

Dennis
1976 CB750F

1977 CB750F2 In bits

1964 BSA A65R In bits

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal