Author Topic: Tacho Gear... gearing  (Read 727 times)

Offline Lobo

  • Lobo
  • SOHC Master
  • Posts: 1568
  • Lobo
    • View Profile
    • Lobo
Tacho Gear... gearing
« on: October 08, 2020, 09:33:08 AM »
Hi,
To save me manually turning the crank 10 times and counting....has anyone got the definitive answer to the ratio of crank turns versus tacho gear turns?

(got the tacho apart, and figured I may as well spin it up (with a drill and an iPhone strobe) to set the needle back correctly. 😂. And yep, overly complicated but the bodies are drying and I love a good fiddle....)

Ta.

Offline Lobo

  • Lobo
  • SOHC Master
  • Posts: 1568
  • Lobo
    • View Profile
    • Lobo
Re: Tacho Gear... gearing
« Reply #1 on: October 12, 2020, 10:34:47 PM »
Ok, you’ve all been hanging on far too long for this one...
4 turns of the crank gives 1 turn on the Rev counter drive.

Whilst I’m at it, 1 turn of the front wheel gives 2.875 turns on the speedo drive.

💤.

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8241
    • View Profile
Re: Tacho Gear... gearing
« Reply #2 on: October 12, 2020, 10:46:46 PM »
🤣 🤣 🤣 🤣 If it keeps you brain ticking nicely Simon, these little things are worth doing.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline SeanFD

  • SOHC Member
  • Posts: 232
  • "Still running against the wind"
    • View Profile
    • Belfast-2-Belfast-By-Bike
Re: Tacho Gear... gearing
« Reply #3 on: October 13, 2020, 09:19:42 AM »
That’s great; just the sort of info you can never find when you’re looking for it! 😂😂
CB750 K2 - Ridden from Belfast(SA)-2-Belfast(NI)!
CB750 K1 - The less, said the better!
CB450 K1 - A work in progress.
CB400F Supersport - Rusty - not any more!

Offline Lobo

  • Lobo
  • SOHC Master
  • Posts: 1568
  • Lobo
    • View Profile
    • Lobo
Re: Tacho Gear... gearing
« Reply #4 on: October 13, 2020, 12:17:17 PM »
Yep Julie...all rather sad!

Hey Sean... I was born in Zambia (Kitwe).... there from ‘58-‘71. Did a bit of school in Zim / Marandellas (Peterhouse). You around then....?

Offline SeanFD

  • SOHC Member
  • Posts: 232
  • "Still running against the wind"
    • View Profile
    • Belfast-2-Belfast-By-Bike
Re: Tacho Gear... gearing
« Reply #5 on: October 13, 2020, 03:59:31 PM »
Nooo. I was just being born then!  ;D (‘57)

Been to Peterhouse on many occasions though; Ii bet it’s grown since your day. There is now a prep school and a Peterhouse Girls, across and up the road.
CB750 K2 - Ridden from Belfast(SA)-2-Belfast(NI)!
CB750 K1 - The less, said the better!
CB450 K1 - A work in progress.
CB400F Supersport - Rusty - not any more!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal