SOHC.co.uk Forums > CB500/550

CB500K2 Carb Rebuild Kits

(1/1)

philward:
Now onto carb rebuild so whats the current recommendation for rebuild kits for 500. Previously used Keyster kits on 750's I've done but so many on the market now. Lots of chinesse stuff and not sure if what DS and CMSL is chinese anyway. Cruzinimage? (not sure they do them for 500?)

Johnwebley:
They did do 500 kits.

If you go to their Ebay store.

Contact seller.

Ask

Sent from my SM-A750FN using Tapatalk

Nurse Julie:
Use your original brass ware if you can Phil and I have the Viton O ring kits in stock and the JIS screw kits, sync port screw kit etc.

philward:

--- Quote from: Nurse Julie on November 24, 2020, 11:50:50 AM ---Use your original brass ware if you can Phil and I have the Viton O ring kits in stock and the JIS screw kits, sync port screw kit etc.

--- End quote ---
What about the shaped carb top gasket, ist that in the kit Julie?

Nurse Julie:

--- Quote from: philward on November 24, 2020, 12:43:31 PM ---
--- Quote from: Nurse Julie on November 24, 2020, 11:50:50 AM ---Use your original brass ware if you can Phil and I have the Viton O ring kits in stock and the JIS screw kits, sync port screw kit etc.

--- End quote ---
What about the shaped carb top gasket, ist that in the kit Julie?

--- End quote ---
No Phil, I don't put them in my kit. We either use the existing ones which are usually fine to use again, or cut our own out of gasket paper.

Navigation

[0] Message Index