wiring loom clips

[haynes66]

anyone know where i can get similar wiring loom clips as used on the 750? the ones with the black wrap around it

[paul G]

Yamiya

[haynes66]

that is awesome!  many thanks. i've never bought from japan before. is carriage expensive? the clips are only around a tenner

[Bryanj]

Depends on how much you spend, including postage, if HMRC and post office get involved

[AndyD]

Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]
Cheers,
Andy

[haynes66]

thank you. someone on another forum told me that lambretta ones are similar and readily available so i've ordered a pack to see how they look

[adespin]

Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
(Attachment Link) (Attachment Link)
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
(Attachment Link) (Attachment Link) (Attachment Link)
Cheers,
Andy

 Thanks for the tip, great website.

[71 V12]

Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
(Attachment Link) (Attachment Link)
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
(Attachment Link) (Attachment Link) (Attachment Link)
Cheers,


Andy

Great tip👍👍

[SeanFD]

Agree. Good info.

[haynes66]

i'll try to post some pics later but i got some lambretta clips and some 9.5mm black heatshrink from screwfix and they look ok