Author Topic: What's This  (Read 846 times)

Offline philward

  • SOHC Jedi
  • Posts: 2795
    • View Profile
What's This
« on: February 12, 2021, 06:20:31 PM »
Just tidying the garage and found this about 6 foot away from bench that I stripped 500 engine. I don't recognise it as anything I stripped but now worrying that it's something that 'flicked' out and didn't notice. Anyone recognise it from the 500 engine? Could be from anything that I've worked on before but worth a check prior to building engine back up. It's 6mm x 10.5mm.
Cheers

Sent from my moto g(7) power using Tapatalk

Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8206
    • View Profile
Re: What's This
« Reply #1 on: February 12, 2021, 06:34:20 PM »
Maybe gearbox bearing locator dowel Phil 🤔
« Last Edit: February 12, 2021, 06:36:02 PM by Nurse Julie »
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: What's This
« Reply #2 on: February 12, 2021, 06:56:54 PM »
Starter clutch roller?

Sent from my SM-A750FN using Tapatalk

lifelong motorcycle rider,and fan

Offline philward

  • SOHC Jedi
  • Posts: 2795
    • View Profile
Re: What's This
« Reply #3 on: February 12, 2021, 07:46:07 PM »
Dowels seam to be in place Julie. Haven't had starter clutch apart John (just replaced cush drive rubbers)

Sent from my moto g(7) power using Tapatalk

Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline philward

  • SOHC Jedi
  • Posts: 2795
    • View Profile
Re: What's This
« Reply #4 on: February 12, 2021, 09:10:40 PM »
Just gone into the garage and checked crankcases (been in a plastic bag since painting) - and Julie was right - gearbox bearing retaining pin! Was there last time I looked! I would have found out it was missing just before I was going to assemble the engine - and had to order one and wait - very lucky to find it randomly on the floor several feet from where I was working on the engine.
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline Johnwebley

  • SOHC Jedi
  • Posts: 3204
    • View Profile
Re: What's This
« Reply #5 on: February 12, 2021, 09:12:27 PM »
Maybe gearbox bearing locator dowel Phil
Never disagree with Nurse

Sent from my SM-A750FN using Tapatalk

lifelong motorcycle rider,and fan

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8206
    • View Profile
Re: What's This
« Reply #6 on: February 12, 2021, 09:17:39 PM »
Maybe gearbox bearing locator dowel Phil
Never disagree with Nurse

Sent from my SM-A750FN using Tapatalk
😊😊😊😘😘😘
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8206
    • View Profile
Re: What's This
« Reply #7 on: February 12, 2021, 09:18:35 PM »
Just gone into the garage and checked crankcases (been in a plastic bag since painting) - and Julie was right - gearbox bearing retaining pin! Was there last time I looked! I would have found out it was missing just before I was going to assemble the engine - and had to order one and wait - very lucky to find it randomly on the floor several feet from where I was working on the engine.
What else is on the floor Phil? 😁😁😁
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline philward

  • SOHC Jedi
  • Posts: 2795
    • View Profile
Re: What's This
« Reply #8 on: February 12, 2021, 09:33:52 PM »
Who nows! I have bagged and photographed everything as I disassembled them - the pin must have fell out when working on the cases - I thought they were friction fit but obviously wrong!
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal