Author Topic: Brake hose thread size please  (Read 375 times)

Offline paulbaker1954

  • SOHC Pro
  • Posts: 696
  • I'll just be 5 minutes dear!!
    • View Profile
Brake hose thread size please
« on: February 19, 2021, 08:07:30 AM »
Anyone know what the female thread size is where the caliper steel pipe joins bottom hose.

Looking to make up some braided hose and need tight end fitting

(Part 4 in picture)
If you think there's light at the end of the tunnel it's usually another train !!

2016 Yamaha MT09 Tracer
1971 Honda CB500 Four K0

Offline Erny

  • CB750K7 CB550K1
  • SOHC Pro
  • Posts: 522
    • View Profile
Re: Brake hose thread size please
« Reply #1 on: February 19, 2021, 08:29:49 AM »
Paul

attached mine, original - M10x1.25
[ Guests cannot view attachments ]
CB750K7 US model (1977)
CB550K1 US model (1975)

Offline Bryanj

  • Grogu
  • *
  • Posts: 10694
    • View Profile
Re: Brake hose thread size please
« Reply #2 on: February 20, 2021, 10:41:08 AM »
Played this game a lot, several of the braided end fittings even with correct thread will not seal to the metal pipe as you need the nut on the metal pipe needs the first two thread removed to allow it to screw in far enough the seal the flare

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal