« previous next »
Pages: 1 [2]   Go Down

Author Topic: How do I hold this shaft to undo the end nut?  (Read 1111 times)

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: How do I hold this shaft to undo the end nut?
« Reply #15 on: March 17, 2021, 08:23:58 PM »
Or use a piece of hardwood.  It won't damage anything.  I've done it that way for years
Logged
Where's that 10mm socket got to?

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6281
    • View Profile
Re: How do I hold this shaft to undo the end nut?
« Reply #16 on: March 17, 2021, 09:43:16 PM »
Quote from: mike the bike on March 17, 2021, 08:23:58 PM
Or use a piece of hardwood.  It won't damage anything.  I've done it that way for years
I was bereft of hardwood but had some offcut 15mm Speedfit pipe to hand.
Logged
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
Pages: 1 [2]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal