CB200

[Deano400]

Well, I’d just stripped down a 400/4 and then a CB200 came my way.
The 400 has a slight issue. The side stand mounting had an abundance of non-factory extra weld that I decided to clean up. When I started the clean-up it was apparent that the weld was bad with cracks and holes with no frame tube behind it all.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
So the 400 is going on the back burner until I can find someone more skilled than me to put it right.
So now I’m starting on the 200.
[ Guests cannot view attachments ]

[Deano400]

The tank and side panels are boxed up and ready to go to Menno for a coating of Muscat Green. That’s if they ever get there with this Br%&() crap.
Thought I’d have a go at rescuing the tank cover as there was a decent one on fleebay. Anyway it has come up ok so don’t need to buy a replacement.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
One obvious part I’m missing is the breather tube clip 15772-354-000. Doesn’t seem to be any about apart from NPN who don’t list the UK as somewhere they ship to.
[ Guests cannot view attachments ]
Has anyone got one they are willing to sell? Or one I can borrow to make a copy, I will pay postage both ways. Or is willing to measure one for me in enough detail that I can make one.
Decals seem to be in short supply so has can anyone take pictures of the following with a ruler adjacent to give the dimensions. I will ask Piki if he can make them for me.
Mark, Caution
[ Guests cannot view attachments ]
Mark, Muffler Caution
Mark, Tyre Caution
Mark, Bat. Caution
Any help appreciated.
John

[Deano400]

Thanks Oddjob.
I have emailed Hondanuts.
The problem I am having with NPN is when it comes to shipping, the UK is not on their drop down list. Strange.

[K2-K6]

I use stainless steel internal brick ties to make things like this, very close match in wire diameter and quite soft to bend round a former.

[Deano400]

Hi Oddjob,
Just had a reply from Hondanuts. They say they haven't got the bits I need. I wasn't surprised really as the list on the website is over three months old.
I'd appreciate it if you ask for a price for the other one you know about. Thanks.

K2-K6, yes I have some stainless brick ties. 

[Deano400]

Breather clip in hand. Many thanks to Oddjob.