Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Hi,I've been using a BZP kit (s) from Gateros for years now with great results. As with any finishing process, good prep is the key to success. I'm fortunate that I have a variable voltage and current power supply but you can do it with the kit supplied and a car battery. Only takes about 1 volt and a few milliamps of current to work.I did an article for Tansha (VJMC) a while back and I had a page on my web site - I'll put it back up when I can. I think Gateros had a copy on their site too.Ian
Quote from: orcadian on April 06, 2021, 07:03:53 PMHi,I've been using a BZP kit (s) from Gateros for years now with great results. As with any finishing process, good prep is the key to success. I'm fortunate that I have a variable voltage and current power supply but you can do it with the kit supplied and a car battery. Only takes about 1 volt and a few milliamps of current to work.I did an article for Tansha (VJMC) a while back and I had a page on my web site - I'll put it back up when I can. I think Gateros had a copy on their site too.IanIan - out of interest do you use de-ionised water with the kit? If so, mind if I ask where you source it??