SOHC.co.uk Forums > SOHC Singles & Twins

cb360 UK head lamp

(1/3) > >>

nairb:
Hello, Did the Uk CB360 G5 have a bulb headlight and not a sealed beam unit?.  I have a USA cb360 K0 import and its the sealed beam headlamp.  It does have both beams working so its ok for now.
But I would change it for the separate bulb system.  Im sure the CB250G5 UK model was NOT sealed beam??.

Has anybody changed the sealed beam for the bulb headlamp.
Ta
Nairb

Bryanj:
UK had bulb unit and the replector + bulb connector is all you need

JezzaPeach:
On the 500 I replaced a bodged unit with a new one. Tried led - good white light for day but didn’t focus at night. Now using a Xenon 55/60 H4 which focusses well with dip cut off, and seems bright, still to road test at night.

nairb:
I finally found the part numbers for the UK reflector and bulb bits.  It seems that David S does a *REPRO*HEADLIGHT
here : - https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_33120268632P/

Has anybody tried one of these.  Fair bit cheaper that original.

With the number of 250/360G5 in this country I thought there would be a few of on ebay.  But if the David S product fits ok then its the way forward.

Ta
Nairb

Bryanj:
Trouble is thet would all be old and corroded

Navigation

[0] Message Index

[#] Next page