Author Topic: Fork springs  (Read 921 times)

Offline TERRIBLEONE

  • Newbie
  • Posts: 16
    • View Profile
Fork springs
« on: July 28, 2021, 05:18:36 PM »
Afternoon all! My CB750 K5 needs new fork springs, does anyone have any suggestions or experience with this? Seems to be the progressive yss or the ikon/koni springs available? Anyone have experience with either? Will they require any extra spacers or straight swap for old springs? Thanks, Ben.

Offline philward

  • SOHC Jedi
  • Posts: 2802
    • View Profile
Re: Fork springs
« Reply #1 on: July 28, 2021, 10:59:00 PM »
I put progresive in my 750K2 about 4 years ago - slight improvement. Can't remember which make but no spacers needed
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline TERRIBLEONE

  • Newbie
  • Posts: 16
    • View Profile
Re: Fork springs
« Reply #2 on: July 29, 2021, 12:25:51 AM »
Thanks Phil. I’ve just ordered some ikon progressive fork springs and some tec rear shocks. Should do the trick. Cheers.

Offline Arch stanton

  • SOHC Expert
  • Posts: 425
    • View Profile
Re: Fork springs
« Reply #3 on: August 20, 2021, 08:17:52 PM »
I put progressive springs + 10w oil in my 750f1 forks. Do soft that set up was dreadful. Under heavy braking. The Midgard would lodge between the numbers 2 & 3 down pipes.
So I changed to 15w oil & put in 30mm preload spacers. Everything is grand now.
Sean.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal